7.2.3. VNC Settings

Virtual Network Computing (VNC) is a standard protocol widely used for accessing PC Desktops remotely over the network. If enabled, you will be able to connect to the recorder over VNC using any standard VNC Client such as RealVNC or TightVNC. When you connect to the Recorder via VNC, you will be able to remotely view and interact with the Recorder’s Front Panel. You will not be able to hear audio over this link as the VNC Protocol does not provide audio forwarding.

To use VNC, you must first enable the service by selecting the relevant check box on this page, and enter a password that VNC Clients will be expected to provide to gain access. The password must be entered twice to make sure it is entered correctly. Once enabled, NexLog DX-Series VNC access is provided over port 5900.