Eventide Communications NexLog DX-Series Recorder ManualΒΆ
- 1. Introduction
- 2. General Specifications
- 3. Recorder Setup
- 3.1. Unpacking the Recorder
- 3.2. Bench Test
- 3.3. Installation
- 3.3.1. Operating Limits
- 3.3.2. Location Considerations
- 3.3.3. Mounting Options
- 3.3.4. Other Considerations
- 3.3.5. Connecting AC Power
- 3.3.6. Before Connecting Audio
- 3.3.7. Connecting Analog Audio
- 3.3.8. Connecting Digital Audio
- 3.3.9. Connecting to an Ethernet Network
- 3.3.10. Connecting a Keyboard
- 3.3.11. Connecting Headphones
- 3.3.12. Connecting Line-Level Equipment
- 4. Recorder Operation
- 5. Client Software and Playback
- 6. The Front Panel User Interface
- 7. Configuration Manager
- 8. Software License
- A. Software Installation and Upgrade
- B. Installation from USB
- C. Channel Wiring for Analog Input Boards
- D. Alert Codes
- E. Incident Evaluation Restore
- F. RTP VOIP Templates
- 6.1. Avaya SBC
- 6.2. Avtec Scout RTP Forwarding
- 6.3. Carybyn Call Handling Solution
- 6.4. Cisco CallManager Skinny Protocol (SPAN)
- 6.5. Cisco CallManager Built-in-Bridge
- 6.6. Motorola Dimetra AIS Interface
- 6.7. EFJohnson Console Protocol
- 6.8. Harris P25 Recording
- 6.9. Intrado SipRec Recording
- 6.10. MCPTT 3GPP/LTE RADIO RECORDING
- 6.11. Mitel Secure Recording Connector
- 6.12. MOTOTRBO Controller-less Recording Interface
- 6.13. MOTOTRBO Capacity Max Recording Interface
- 6.14. Omnitronics Recording
- 6.15. Tait Radio DMR/MPT Recording Interface
- 6.16. Tait Radio Trunked P25 ISSI
- 6.17. Zetron Logger
- G. Archive Pairing